Winnerblog328

After downloading the driver package for the Lexar USB Jumpdrive the user should store it on the computer and unzip the file. The next step is to plug the Lexar USB Jumpdrive into a USB port. A wizard screen for adding New Hardware will appear, and the user should click on Next. If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device. You safely remove the USB device from the USB port. You reconnect the same USB device or a different USB device to the same USB port on the hub. In this scenario, the computer does not detect the USB device. Note This issue affects USB 2.0 hubs and USB 2.0 components in USB 3.0 hubs. This issue occurs because the USB port is disabled. Removable storage includes USB drives, whereas USB connection (mobile only) excludes USB charging but includes other USB connections on mobile devices only. Click OK to close General settings and Device restrictions. Click Create to save the profile. Allow installation and usage of specifically approved peripherals.

• Drivers Lexar Media USB Devices
• Drivers Lexar Media Usb Devices Flash Drive
• Drivers Lexar Media Usb Devices Usb
• Drivers Lexar Media Usb Devices Pc Camera
• Drivers Lexar Media Usb Devices 3.0

Symptoms

When you try to install Windows on a computer by using a Windows installation DVD or ISO file, you receive one of the following error messages.
Note This issue occurs when you try to install Windows 7, Windows Server 2008 R2, Windows 8, or Windows Server 2012.

Windows 8 or Windows Server 2012

Load Driver
A media driver your computer needs is missing. This could be a DVD, USB, or Hard disk driver. If you have a CD, DVD, or USB flash drive with the driver on it, please insert it now.
Note: If the installation media for Windows in the DVD drive or on a USB drive, you can safely remove it for this step.

Windows 7 or Windows Server 2008 R2

Load Driver
A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step

Resolution

To resolve this issue, use one of the following methods, as appropriate for your situation:

• Burn the installation DVD at a slower speed.

• Use a better quality DVD to create the installation DVD.

• Update the BIOS firmware for your DVD drive.

• Use the Windows 7 USB/DVD Download tool to create a bootable USB flash drive, and then use the USB flash drive to install Windows.

More Information

This issue occurs for one of the following reasons:

• The installation DVD is removed during the setup process.

• A low-quality DVD was used to create the installation DVD.

• The speed at which the installation DVD was burned was too fast.

• The DVD drive cannot read the media.

• The ISO file is corrupted.

Troubleshooting methods

Use one of the following methods to troubleshoot this issue, as appropriate for your situation:

• Run the DVD on a different computer to determine whether the DVD works correctly.

• Test your DVD drive by using an official Windows installation DVD.

• Attach the ISO file to a virtual machine to check whether it is corrupted.

When you troubleshoot this issue, first check whether the ISO file is corrupted. Each ISO file that you download from the MSDN Subscriber Downloads website has a SHA1 value that you can compare with the SHA1 value on the MSDN Subscriber Downloads website. However, the Microsoft Volume Licensing Service Center (VLSC) site currently does not list checksums or SHA1 values.
To compare the SHA1 values for the ISO file that you downloaded, follow these steps:

1. Install the Microsoft File Checksum Integrity Verifier tool. To download the tool, go to the following Microsoft Download Center website:

2. At a command prompt, type the following command, and then press Enter:

   Fciv.exe <File name>.iso -sha1

3. Verify that the SHA1 value matches the SHA1 value that is listed on the MSDN Subscriber Downloads website.
   For example, the following information is displayed for the ISO file for Windows 7 Enterprise with Service Pack 1 (x64) on the MSDN Subscriber Downloads website:
   File Name: en_windows_7_enterprise_with_sp1_x64_dvd_u_677651.iso
   Languages: English
   SHA1: A491F985DCCFB5863F31B728DDDBEDB2FF4DF8D1
   The following information is displayed when you run the command for the ISO file for Windows 7 with Service Pack 1 (x64):
   Command: fciv.exe en_windows_7_enterprise_with_sp1_x64_dvd_u_677651.iso -sha1
   Output:
   A491F985DCCFB5863F31B728DDDBEDB2FF4DF8D1
   en_windows_7_enterprise_with_sp1_x64_dvd_u_677651.iso

The ISO file is not corrupted if the SHA1 value on the MSDN Subscriber Downloads website matches the value that is generated when you run the command.

Overview of Lexar USB Format & Repair

Sometimes the Lexar JumpDrive USB flash drive will bring you troubles when it is corrupted, becomes inaccessible, fails to work, doesn't show full capacity, refuses to format due to write-protection, or other unknown reasons, etc. When any of these problems occur, a USB format is required to repair the Lexar JumpDrive USB flash drive in order to make it work properly.

Following are some of the irritating situations that can be fixed by formatting:

• Lexar USB flash disk doesn't show full capacity in disk utility
• Windows is unable to complete the format Lexar USB flash drive
• Lexar USB flash drive is not formatted, do you want to format it now
• Can't delete partition or copy files, because Lexar USB flash drive is write-protected
• Lexar USB flash drive is not working, detected, or recognized in Windows 10/8.1/8/7/XP/Vista

However, if you format your Lexar USB directly to repair it, you will undoubtedly lose all the files on it. Then here comes the question: How to repair your Lexar USB drive by formatting without losing any data? When you need to solve the Lexar USB problem by formatting, the files on your flash drive is generally inaccessible. At this moment, it's advisable for you to recover data from your Lexar USB in advance, and then format it with a Lexar USB format tool.

How to Format/Repair Lexar USB Without Losing Data

There are two procedures for you to repair the Lexar USB. First, you need to recover the data on it to another safe place. And then, you can format the Lexar USB to repair it. Below are the detailed steps:

Procedure 1. Recover Data from Inaccessible Lexar USB Flash Drive

EaseUS Data Recovery Wizard is a reliable choice to recover data from your inaccessible Lexar USB. It is designed for users to easily find back lost and deleted data. The whole recovery process only covers three steps, convenient and time-saving. Here are some features of EaseUS Data Recovery Wizard.

• Supports data recovery from USB, memory card, SD card, local/external hard drive, and more storage devices.
• Provides two scan modes: Quick Scan and Deep Scan, which helps you to find all you want.
• Covers almost all data loss scenarios, including accidental deletion, partition loss, virus attack, etc.
• Trusted by authoritative evaluation agencies such as SOFTPEDIA, TechRadar, cnet, etc.

Download EaseUS Data Recovery Wizard and follow the guide below to save your Lexar USB data beforehand.

Step 1. Run USB data recovery software.

Connect the USB flash drive to your computer and launch EaseUS USB data recovery software on your PC. Select your USB drive which marks as a removable disk, and click 'Scan' to start finding your lost files.

Step 2. Scan all lost files from USB.

EaseUS Data Recovery Wizard will thoroughly scan your USB flash drive and find all your lost data on it. After the scanning process, use the Filter feature to filter a specific file type. You can check and preview found USB files in this program.

Step 3. Restore all lost files from USB.

A double-click will allow you to preview the file results. Choose the target files and click 'Recover' to save them to a secure location on your PC or other external storage devices.

After retrieving your data, you can repair the Lexar USB drive by formatting it with a professional USB formatting tool.

Procedure 2. Format the Lexar USB to Repair It

There are various methods available for users to format a Lexar USB flash drive. You can choose the Lexar published format tool, Windows built-in format tool, and third-party format software. In this part, we will introduce how to format the USB flash drive with Windows built-in tool and a handy third-party tool. Keep reading.

1. Format USB Flash Drive with File Explorer

On Windows computers, you have three choices to format a storage device - with File Explorer, Diskpart, and Disk Management. Here we will show you how to format USB in File Explorer, which is also the simplest of the three methods.

Step 1. Open 'This PC' (in Windows 10) and go to 'Devices and drives'.

Step 2. Right-click your Lexar USB drive and choose 'Format'.

Step 3. Choose the file system and click 'Start'.

Step 4. In the warning prompt, click 'OK' to start formatting your USB.

If you want to know how to format USB with Windows Diskpart, please refer to this article:

2. Format USB with Third-Party Tool - EaseUS Partition Master

EaseUS partition tool - EaseUS Partition Master can help you format your Lexar USB effectively. It can not only work as a Lexar USB formatting tool but also help you deal with all disk-related jobs in complex situations with ease. In addition to helping you format your Lexar USB flash drive, SD card, memory card, partition, hard drive, etc., there are many other attractive features it has.

Download EaseUS Partition Master here and follow the steps below to format your Lexar USB with a few simple clicks.

Step 1. Select the USB drive to format.

Connect your Lexar USB to your computer. Launch EaseUS partition software. Right-click the USB drive and choose 'Format'.

Step 2. Set the drive letter and file system.

Assign a new partition label, file system (NTFS/FAT32/EXT2/EXT3), and cluster size to the selected partition, then click 'OK'.

Step 3. Check the warning box.

Drivers Lexar Media USB Devices

Click 'OK' if you see the Warning window. Since you have recovered data from your USB in advance, don't worry about data loss here.

Step 4. Apply the changes.

Drivers Lexar Media Usb Devices Flash Drive

Click the 'Execute Operation' button first, and then click 'Apply' to format the USB drive.

Drivers Lexar Media Usb Devices Usb

If the Lexar USB drive is write-protected and unable to format, please try to remove the write-protection before formatting it with the EaseUS Lexar USB format tool. For more details, refer to the article 'The disk is write-protected'.

Drivers Lexar Media Usb Devices Pc Camera

The Bottom Line

Drivers Lexar Media Usb Devices 3.0

To prevent data loss disasters that might happen during Lexar USB flash drive repair process, recover your data from the Lexar USB flash drive before formatting. EaseUS Data Recovery Wizard, a reliable data recovery tool, and EaseUS Partition Master, a USB flash drive repair tool, are the keys for successful Lexar flash drive repair. Whenever you have data recovery related or disk related problems on your storage device, download the programs, and follow the tips above for help.