Winnerblog328

The driver is named: usbaudio2.sys and the associated inf file is usbaudio2.inf. The driver will identify in device manager as 'USB Audio Class 2 Device.' This name will be overwritten with a USB Product string, if it is available. The driver is automatically enabled when a compatible device is attached to the system. Thus, you should try to reinstall the USB device driver. Connect the USB flash drive to the PC. Navigate to 'Control Panel' 'System' ‘’Device Manager' 'Disk drivers'. Find and select your USB device, right-click and first choose 'Uninstall' and then choose 'Scan for hardware changes' to refresh the drivers. Click and hold (or right-click) the Start button, then choose Device Manager. Locate and expand the Portable Devices section. Look for your connected device (such as Apple iPhone), then right-click on the device name and choose Update driver. Select 'Search automatically for updated driver software.'

Our goal was to provide our customers with a single, easy-to-use solution to help capture and analyze different kinds of network traffic. Funds under management up This new offering is ideal for customers in both the automotive and industrial markets. The hardware aspect allows fast connection to the Ethernet network and is combined with software that allows intuitive analysis. Click here to read more about the PLUS package. You have been logged in via Facebook.

Automotive Ethernet Tool Support Now Available from K2L

This integration enables k2o timestamp information for messages and events from a variety of sources. All other trademarks mentioned herein are the property of their respective companies. It can also be used to perform analysis and verification, as well as Automotive Test System ATS testing and simulation.

This includes application development, whole-system safeguarding, testing, simulation, deep-system analysis, verification, and stress scenarios. Buy and sell signals.

Automotive Ethernet Tool Support Now Available from K2L – Financial news Euroinvestor

We invite you to consult the privacy policy of these social networks. It is designed to be fast and easy to use to eliminate steep learning curves for new users.

The Law Offices of Howard G. Skip to main content. KG, today announced that automotive Ethernet tool support is now available.

Enter multiple locations State or City separated by comma Nocca a broader search and then use ‘Refine Search’ to narrow down the search results for exact jobs There are no more search result available on current page for you. For more information, visit the K2L website at http: Sign In Sign Up. They allow us to analyse our traffic.

In addition to plastic optical fiber POF physical layer, MOST now supports a low-cost electrical physical layer based on coaxial cables. If you nocca cookies, you can no longer browse the site.

k2l mocca Jobs in Chennai

K2L can assist with all phases of the design process, including rapid prototyping, embedded device development, ready-to-run test solutions and highly productive test environments.

Make sure all the Keywords are spelled correctly Enter skills, Designation, role in Keywords. Refresh the page or go next page to see the results again. Chennai formerly Madras, is the capital city of the Indian state of Tamil Nadu. This new offering is ideal for customers in both the automotive and industrial markets.

The hardware aspect allows fast connection to the Ethernet network and is combined with software that allows intuitive analysis. Hardware interfaces can be connected with a synch cable. For more information, visit: The offering, which was showcased at the Automotive Testing Expo in Stuttgart and ConCarExpo in Berlinis a combination of a mocca hardware tool with a software suite.

K2l Mocca Jobs In Chennai – K2l Mocca Jobs Openings In Chennai –

Elliott Capital Advisors, L. Preliminary announcement of results.

Eta adds spiking neural network support to MCU. K2L can assist with all phases of the design jocca, including rapid prototyping, embedded device development, ready-to-run test solutions and highly productive test environments. Every year a large number of people migrate to Chennai for high paying jobs and career opportunities.

It is designed to be fast and easy to use to eliminate steep learning curves for new users. The offering, which was showcased at the Automotive Testing Expo in Stuttgart and ConCarExpo in Berlinis a combination of a development hardware tool with a software suite. Market News Oct 10, For additional information, visit the K2L website at http: Please provide inputs m2l at least one field.

Summary

• Opening the device and obtaining WinUSB handle.
• Getting information about the device, configuration, and interface settings of all interfaces, and their endpoints.
• Reading and writing data to bulk and interrupt endpoints.

Important APIs

This topic includes a detailed walkthrough of how to use WinUSB Functions to communicate with a USB device that is using Winusb.sys as its function driver.

If you are using Microsoft Visual Studio 2013, create your skeleton app by using the WinUSB template. In that case, skip steps 1 through 3 and proceed from step 4 in this topic. The template opens a file handle to the device and obtains the WinUSB handle required for subsequent operations. That handle is stored in the app-defined DEVICE_DATA structure in device.h.

For more information about the template, see Write a Windows desktop app based on the WinUSB template.

Note WinUSB functions require Windows XP or later. You can use these functions in your C/C++ application to communicate with your USB device. Microsoft does not provide a managed API for WinUSB.

Prerequisites

The following items apply to this walkthrough:

• This information applies to Windows 8.1, Windows 8, Windows 7, Windows Server 2008, Windows Vista versions of Windows.
• You have installed Winusb.sys as the device's function driver. For more information about this process, see WinUSB (Winusb.sys) Installation.
• The examples in this topic are based on the OSR USB FX2 Learning Kit device. You can use these examples to extend the procedures to other USB devices.

Step 1: Create a skeleton app based on the WinUSB template

To access a USB device, start by creating a skeleton app based on the WinUSB template included in the integrated environment of Windows Driver Kit (WDK) (with Debugging Tools for Windows) and Microsoft Visual Studio.You can use the template as a starting point.

For information about the template code, how to create, build, deploy, and debug the skeleton app, see Write a Windows desktop app based on the WinUSB template.

The template enumerates devices by using SetupAPI routines, opens a file handle for the device, and creates a WinUSB interface handle required for subsequent tasks. For example code that gets the device handle and opens the device, see Template code discussion.

Step 2: Query the Device for USB Descriptors

Next, query the device for USB-specific information such as device speed, interface descriptors, related endpoints, and their pipes. The procedure is similar to the one that USB device drivers use. However, the application completes device queries by calling WinUsb_GetDescriptor.

The following list shows the WinUSB functions that you can call to get USB-specific information:

Drivers K2l Usb Devices Adapter

• Additional device information.

  Call WinUsb_QueryDeviceInformation to request information from the device descriptors for the device. To get the device's speed, set DEVICE_SPEED (0x01) in the InformationType parameter. The function returns LowSpeed (0x01) or HighSpeed (0x03).

• Interface descriptors

  Call WinUsb_QueryInterfaceSettings and pass the device's interface handles to obtain the corresponding interface descriptors. The WinUSB interface handle corresponds to the first interface. Some USB devices, such as the OSR Fx2 device, support only one interface without any alternative setting. Therefore, for these devices the AlternateSettingNumber parameter is set to zero and the function is called only one time. WinUsb_QueryInterfaceSettings fills the caller-allocated USB_INTERFACE_DESCRIPTOR structure (passed in the UsbAltInterfaceDescriptor parameter) with information about the interface. For example, the number of endpoints in the interface is set in the bNumEndpoints member of USB_INTERFACE_DESCRIPTOR.

  For devices that support multiple interfaces, call WinUsb_GetAssociatedInterface to obtain interface handles for associated interfaces by specifying the alternative settings in the AssociatedInterfaceIndex parameter.

• Endpoints

  Call WinUsb_QueryPipe to obtain information about each endpoint on each interface. WinUsb_QueryPipe populates the caller-allocated WINUSB_PIPE_INFORMATION structure with information about the specified endpoint's pipe. The endpoints' pipes are identified by a zero-based index, and must be less than the value in the bNumEndpoints member of the interface descriptor that is retrieved in the previous call to WinUsb_QueryInterfaceSettings. The OSR Fx2 device has one interface that has three endpoints. For this device, the function's AlternateInterfaceNumber parameter is set to 0, and the value of the PipeIndex parameter varies from 0 to 2.

  To determine the pipe type, examine the WINUSB_PIPE_INFORMATION structure's PipeInfo member. This member is set to one of the USBD_PIPE_TYPE enumeration values: UsbdPipeTypeControl, UsbdPipeTypeIsochronous, UsbdPipeTypeBulk, or UsbdPipeTypeInterrupt. The OSR USB FX2 device supports an interrupt pipe, a bulk-in pipe, and a bulk-out pipe, so PipeInfo is set to either UsbdPipeTypeInterrupt or UsbdPipeTypeBulk. The UsbdPipeTypeBulk value identifies bulk pipes, but does not provide the pipe's direction. The direction information is encoded in the high bit of the pipe address, which is stored in the WINUSB_PIPE_INFORMATION structure's PipeId member. The simplest way to determine the direction of the pipe is to pass the PipeId value to one of the following macros from Usb100.h:

  • The USB_ENDPOINT_DIRECTION_IN (PipeId) macro returns TRUE if the direction is in.
  • The USB_ENDPOINT_DIRECTION_OUT(PipeId) macro returns TRUE if the direction is out.

  The application uses the PipeId value to identify which pipe to use for data transfer in calls to WinUSB functions, such as WinUsb_ReadPipe (described in the 'Issue I/O Requests' section of this topic), so the example stores all three PipeId values for later use.

The following example code gets the speed of the device that is specified by the WinUSB interface handle.

The following example code queries the various descriptors for the USB device that is specified by the WinUSB interface handle. The example function retrieves the types of supported endpoints and their pipe identifiers. The example stores all three PipeId values for later use.

Step 3: Send Control Transfer to the Default Endpoint

Next, communicate with the device by issuing control request to the default endpoint.

Drivers K2l Usb Devices Dongle

All USB devices have a default endpoint in addition to the endpoints that are associated with interfaces. The primary purpose of the default endpoint is to provide the host with information that it can use to configure the device. However, devices can also use the default endpoint for device-specific purposes. For example, the OSR USB FX2 device uses the default endpoint to control the light bar and seven-segment digital display.

Control commands consist of an 8-byte setup packet, which includes a request code that specifies the particular request, and an optional data buffer. The request codes and buffer formats are vendor defined. In this example, the application sends data to the device to control the light bar. The code to set the light bar is 0xD8, which is defined for convenience as SET_BARGRAPH_DISPLAY. For this request, the device requires a 1-byte data buffer that specifies which elements should be lit by setting the appropriate bits.

The application can set this through the user interface (UI), such as by providing a set of eight check box controls to specify which elements of the light bar should be lit. The specified elements correspond to the appropriate bits in the buffer. To avoid UI code, the example code in this section sets the bits so that alternate lights get lit up.

Use the following steps to issue a control request.

1. Allocate a 1-byte data buffer and load the data into the buffer that specifies the elements that should be lit by setting the appropriate bits.

2. Construct a setup packet in a caller-allocated WINUSB_SETUP_PACKET structure. Initialize the members to represent the request type and data as follows:

   • The RequestType member specifies request direction. It is set to 0, which indicates host-to-device data transfer. For device-to-host transfers, set RequestType to 1.
   • The Request member is set to the vendor-defined code for this request, 0xD8. It is defined for convenience as SET_BARGRAPH_DISPLAY.
   • The Length member is set to the size of the data buffer.
   • The Index and Value members are not required for this request, so they are set to zero.

3. Call WinUsb_ControlTransfer to transmit the request to the default endpoint by passing the device's WinUSB interface handle, the setup packet, and the data buffer. The function receives the number of bytes that were transferred to the device in the LengthTransferred parameter.

The following code example sends a control request to the specified USB device to control the lights on the light bar.

Drivers K2l Usb Devices Pc Camera

Step 4: Issue I/O Requests

Next, send data to the device's bulk-in and bulk-out endpoints that can be used for read and write requests, respectively. On the OSR USB FX2 device, these two endpoints are configured for loopback, so the device moves data from the bulk-in endpoint to the bulk-out endpoint. It does not change the value of the data or add any new data. For loopback configuration, a read request reads the data that was sent by the most recent write request. WinUSB provides the following functions for sending write and read requests:

To send a write request

1. Allocate a buffer and fill it with the data that you want to write to the device. There is no limitation on the buffer size if the application does not set RAW_IO as the pipe's policy type. WinUSB divides the buffer into appropriately sized chunks, if necessary. If RAW_IO is set, the size of the buffer is limited by the maximum transfer size supported by WinUSB.
2. Call WinUsb_WritePipe to write the buffer to the device. Pass the WinUSB interface handle for the device, the pipe identifier for the bulk-out pipe (as described in the Query the Device for USB Descriptors section of this topic), and the buffer. The function returns the number of bytes that are actually written to the device in the bytesWritten parameter. The Overlapped parameter is set to NULL to request a synchronous operation. To perform an asynchronous write request, set Overlapped to a pointer to an OVERLAPPED structure.

Write requests that contain zero-length data are forwarded down the USB stack. If the transfer length is greater than a maximum transfer length, WinUSB divides the request into smaller requests of maximum transfer length and submits them serially.The following code example allocates a string and sends it to the bulk-out endpoint of the device.

To send a read request

• Call WinUsb_ReadPipe to read data from the bulk-in endpoint of the device. Pass the WinUSB interface handle of the device, the pipe identifier for the bulk-in endpoint, and an appropriately sized empty buffer. When the function returns, the buffer contains the data that was read from the device. The number of bytes that were read is returned in the function's bytesRead parameter. For read requests, the buffer must be a multiple of the maximum packet size.

Zero-length read requests complete immediately with success and are not sent down the stack. If the transfer length is greater than a maximum transfer length, WinUSB divides the request into smaller requests of maximum transfer length and submits them serially. If the transfer length is not a multiple of the endpoint's MaxPacketSize, WinUSB increases the size of the transfer to the next multiple of MaxPacketSize. If a device returns more data than was requested, WinUSB saves the excess data. If data remains from a previous read request, WinUSB copies it to the beginning of the next read request and completes the request, if necessary.The following code example reads data from the bulk-in endpoint of the device.

Step 5: Release the Device Handles

After you have completed all the required calls to the device, release the file handle and the WinUSB interface handle for the device. For this, call the following functions:

• CloseHandle to release the handle that was created by CreateFile, as described in the step 1.
• WinUsb_Free to release the WinUSB interface handle for the device, which is returned by WinUsb_Initialize.

Step 6: Implement Main

The following code example shows the main function of your console application.

Next steps

If your device supports isochronous endpoints, you can use WinUSB Functions to send transfers. This feature is only supported in Windows 8.1.

Drivers K2L USB Devices

For more information, see Send USB isochronous transfers from a WinUSB desktop app.

Drivers K2l Usb Devices Wireless Adapter

Related topics

WinUSB
WinUSB Architecture and Modules
WinUSB (Winusb.sys) Installation
WinUSB Functions for Pipe Policy Modification
WinUSB Power Management
WinUSB Functions
Write a Windows desktop app based on the WinUSB template